Specifications
| Controls | |
|---|---|
| 8 Channel faders, 60mm travel, 8 Rotary pan potentiometers | |
| Bass control ±12dB at 100Hz, Treble control ±12dB at 10kHz | |
| 1 Master volume control | |
| A white scribble strip is provided beneath faders for channel notation. | |
| Connections | |
| Normal outputs | 2 Standard A gauge 3 pole jack sockets |
| Low Z output | Standard A gauge 3 pole break jack. Local input Standard A gauge 3 pole break jack (balanced) 2 pole jack may be used (will strap the input unbalanced) |
| Inputs are via a 38 way EDAC connector on a captive flexible 5 metre multicore cable carrying inputs and power. | |
| Signal inputs to the distribution unit are via a 38 way EDAC connector. A parallel connector is also provided to link to other distribution units. | |
| Power inlet to distribution units is via an I.E.C. connector | |
| 230-240V AC Operation fuse 2A A/S 110-120V AC Operation fuse 3.5A A/S | |
| Performance - Maximum output level | |
| Normal output sockets | 2 x 3 watts into 400Ω - 35V RMS 2 x 5 watts into 200Ω - 33V RMS 2 x 7 watts into 100Ω Minimum recommended load 100Ω |
| Low Z output socket (break jack) | 2 x 8 watts into 8Ω absolute minimum load 8Ω |
| Protection | |
| Output devices are short circuit protected and incorporate thermal shut-down circuitry | |
| Distortion | |
| At rated output | <0.1% THD |
| Frequency Response | |
| Controls set flat | ±1dB 20Hz to 20kHz |
| Noise | |
| Signal to Noise Ratio | Better than 90dB (audio band) ref. 0dBm input level controls set for maximum output. |
| Input | |
| Balanced bridging differential amplifier, Impedance balanced >44KΩ | |
| Impedance strapped unbalanced >22KΩ. Local input on 3 pole break jack on channel 8 | |
| Input Channel Separation | |
| Dependent on closed fader end resistance, Typical fader kill -85dB | |
| Mounting | |
| A standard 3/8" BSW bush is provided in the base of the unit to facilitate mounting on a standard microphone stand (not supplied). | |
| An optional mounting arm to allow a Que-8 to share a standard microphone stand and an optional headphone storage bracket are available. | |
| Finish | |
| Front panels | Available in black or gunmetal grey anodised aluminium with etched silver notation which will not rub off in use. |
| Base cover | Black plastic-coated steel. |
| Distribution unit covers | Black plastic-coated steel. |
| Dimensions | |||
|---|---|---|---|
| Que-8 | |||
| Length 285mm (11.2") | Width 233mm (9.2") | Height 92mm (3.6") tapering to 42mm (1.65") | |
| Distribution Unit | |||
| 19" rack mount 2RU | Length 483mm (19") | Height 89mm (3.5") | Depth 250mm (9.8") |
Formula Sound reserve the right to alter specifications at any time without notice.